Spring Cleaning liquidations. . .

Discussion in 'Gun Parts - Stocks, Barrels, Actions, etc.' started by NesikaChad, Apr 22, 2010.

  1. NesikaChad

    NesikaChad Well-Known Member

    Messages:
    753
    Joined:
    Jan 28, 2007
    The following items are for sale.

    A few rules.

    1. If you decide you want something, please send me a PM with your mailing information so that I can expedite getting a shipping quote. NONE of the prices include shipping. The only exception being is if someone comes along and scoops ALL of it up. I'll pay for that but that's all.

    As a habit, I don't get much into piece work. I don't mind helping a guy out but I don't thread barrels without an action. I know others do it, that's fine. It's not something I want to get into.

    2. As soon as you commit I'm going to mark the item as sold, remove its description/photo, and attach your name along with the date. So please be a good sport as I'm taking you for your word.

    3. I can do CC, Check, MO, whatever. In ten years I've never been burned once so I will ship as soon as I have an address and a written commitment to buy. This applies to LRH forum members who've been here a while. At least ten posts. A newb with a join date of 5 minutes ago and one post is going to have to wait till the check arrives.

    4. With the exception of a few items, these are all USED. I do not offer any sort of warranty or guarantee. Ask your questions, I will answer truthfully/detailed as I can but in the end the decision to purchase is yours. I don't have the time/ambition to ship this stuff to and from all over the creation.

    5. Items are priced at reasonable/good rates. They are not subject to haggling. Not unless your buying all of it then I'll offer some wiggle room.

    Thanks.

    Chad

    Take off Barrels:

    Note. Not many folks know of Mark Chanlynn barrels so I'm going to take a moment to offer this. IMO there's nothing better. Period. Mark is a friend who's helped me since I was first starting in this trade. His barrels are second to none in all regards. You cannot go wrong with a Chanlynn barrel. Kyle Leibertrau won the 2007 World championships in Palma using one that I installed in 2005. They are cut rifle bores and typically run about 2 points higher on the Rockwell C scale than other barrels. Mark's shop (Rocky Mountain Rifle Works) has been in business for well over 30 years. He's a one man band so the QC dept begins and ends with him. He learned the trade from Boots Obermeyer. Those who do know of his stuff (he's held in high regards in the Palma circles) swear by it.

    Just a little FYI.

    1. Mark Chanlynn SS 6mm 1-8ROT fitted for a Winchester M70 Push feed action. (1.0 X 16tpi) Chambered in the RUAG 6mm X 47 Swiss Match. (bad azz cartridge btw) Barrel is 25.5' inches long. Very low round count. Less than 100 Barrel is a heavy varmint contour and has 4 6-48 holes drilled in it for a Unertyl external turret type target scope. I also have a quantity (around 150-200) pieces of original RUAG 6x47SM brass for this barrel. The 6x47SM is a cartridge I brought to the US in 2001. I had a friend who was able to bring me once fired pieces picked off the line at the range where the Swiss national team trains. Dies are available from RCBS and Redding also. Original RUAG brass is extremely rare so this is kind of a novelty/jewel.

    I also have one of the few chambering/sizing reamers in the US for this thing.


    $175.00 barrel
    $ 1.00 each/brass

    [​IMG]


    2. Kreiger (might be a Brux) medium palma contour 30 caliber. .298/.3075 bore, 1-12ROT. Barrel is 29.75" long. Round count is between 2k-3k. Fitted for a Nesika action (1.0625x18tpi)

    $50.00

    [​IMG]


    3. SOLD to StrictlyRUM on 4/23/2010

    4. SOLD to GearGrinder on 4/22/2010

    5. SOLD to 406PAT on 2/23/2010

    6. SOLD to local on 2/25/2010
     
    Last edited: Apr 28, 2010
  2. NesikaChad

    NesikaChad Well-Known Member

    Messages:
    753
    Joined:
    Jan 28, 2007
    Other stuff:

    Starret 1-2" micrometer, carbide tipped anvil/thimble. Model #2

    $65.00

    [​IMG]

    Scherr-Tumico 2-3" micrometer

    $25.00

    [​IMG]


    Central tool 3-4" micrometer

    $50.00


    [​IMG]

    Federal jewel movement .00025" resolution dial indicator Model D3K

    $20.00
     
    Last edited: Apr 28, 2010

  3. NesikaChad

    NesikaChad Well-Known Member

    Messages:
    753
    Joined:
    Jan 28, 2007
    UNFINISHED 6ALV Titanium receiver blank. Deep hole drilled, and honed, EDM race ways, contoured like a Nesika flat bottom action. (not completely finished. Receiver ring threads completed, no helical ramps on the lug faces. NO FFL required since its not complete. Most of the hard work is done. Build a bolt, finish the action and your the proud owner of a one of a kind action.

    $300.00

    [​IMG]
    [​IMG]
    [​IMG]



    Floor metal/detachable magazines:

    2 NEW H/S Precision detachable magazine floor metal/magazines for Std length remington actions. centerfeed magazines. 5 round capacity magazines.

    $275.00ea

    [​IMG]




    Cheers,

    Chad
     
    Last edited: Apr 22, 2010
  4. 406pat

    406pat Well-Known Member

    Messages:
    204
    Joined:
    Nov 21, 2008
    PM sent on #2
     
  5. geargrinder

    geargrinder Well-Known Member

    Messages:
    1,972
    Joined:
    Nov 6, 2006
    How long is it?
     
  6. NesikaChad

    NesikaChad Well-Known Member

    Messages:
    753
    Joined:
    Jan 28, 2007

    27.5 from crown to breech face.
     
  7. Broz

    Broz Well-Known Member

    Messages:
    8,636
    Joined:
    Feb 3, 2007
    Darn, no 7mm 9 twist #5 SS fluted that will finish 28"...:D

    But some great deals for sure!

    Jeff
     
  8. geargrinder

    geargrinder Well-Known Member

    Messages:
    1,972
    Joined:
    Nov 6, 2006
    I'll take it.
     
  9. NesikaChad

    NesikaChad Well-Known Member

    Messages:
    753
    Joined:
    Jan 28, 2007

    Marking it as sold now.


    605.490.2561 is my cell. Call when your ready. CC/Check/MO. . . it's all good.

    Thanks!

    Chad.
     
  10. 406pat

    406pat Well-Known Member

    Messages:
    204
    Joined:
    Nov 21, 2008
    I'll Take #5!

    -PJS
     
  11. geargrinder

    geargrinder Well-Known Member

    Messages:
    1,972
    Joined:
    Nov 6, 2006

    Sent you a pm with a couple questions. Will send MO ASAP.
     
  12. Oliveralan

    Oliveralan Well-Known Member

    Messages:
    987
    Joined:
    Sep 15, 2009
    Chad,

    am interested in #2 but what caliber is it? Think you can figure it out? Makes a big difference if it's 2k rnds of 30BR or 2k rnds of 300RUM down the barrel
     
  13. NesikaChad

    NesikaChad Well-Known Member

    Messages:
    753
    Joined:
    Jan 28, 2007
    .


    Sorry, I take things for granted sometimes. Palma is all 308 Winchester. It'll be one of the following chambers:

    95 Palma
    308 Tompkins
    308 Gamboa
    308 Bisley

    These are all variations of the 308 Winchester set up for 155 grain bullets. I build a lot of the international guns so they have to conform to the rules. Americanized Palma is much more open.
     
  14. ddubas

    ddubas Well-Known Member

    Messages:
    194
    Joined:
    Aug 11, 2005
    Mark Chanlynn barrels are great.........too bad you didn't have one in 7mm