SOLD - PENDING FUNDS .338 RUM - M700 LSS Rifle - Left-Hand (NEW PHOTOS)

Discussion in 'Guns For Sale' started by Lefty G-gear, Dec 18, 2010.

  1. Lefty G-gear

    Lefty G-gear Well-Known Member

    Messages:
    669
    Joined:
    Sep 18, 2010

    SOLD FOR $900 - PENDING FUNDS/TRANSFER


    Decision time!

    I have been offered $850 now.

    But I will give it a few more days for others to offer the $950.

    I'm already eating over $450 as it is.




    FOR SALE:

    .338 Remington Ultra Magnum
    Left-Hand Remington Model 700 BDL, Stainless-Steel, Laminate Stock (LSS).

    EXTRAS:
    SS Douglas 26-inch sporter barrel,
    LimbSaver recoil pad,
    Timney trigger,
    Sako-style (AR-15-style) extractor,
    muzzle brake (adds 2-inches),
    extended box (4+1 rd.) floorplate magazine.

    Over $1400 invested in this enhanced multipurpose weapon.

    (Now, I need to buy more Automotive tools.)

    NEW PHOTOS: Bighorn Basin Classifieds - Your Bighorn Basin Classifieds

    This rifle was originally a .338 RUM - now with a new Douglas sporter barrel - so it WILL feed and cycle from the magazine.
    -A no-go on converted long-action 700s - internal width at the lower bolt rails = single feed only.
    'Been there - done that - with a 700 .338 WM.
    The RUM rds. would go in the magazine - but jam on the way up!
    -'Was a pisser...I hunt in grizzly country...'sold that one...bought this one.
    Remington had to accomodate the new fat round in the 700's manufacturng process for reliability.
    Gunsmiths may (or may not) do this for you correctly in your conversion.

    The new barrel has less than 150 rds. through it.
    'Can shoot under 1-inch at 100-yards with hunting bullets.
    (Nosler 210-gr. Partitions going 3100+ fps.)
    What will it do with boat-tail 210 Swift Sciroccos, 250 and 300-gr. SMKs?

    The rifle is rather light - standard 700 BDL sporter in weight.
    The muzzle brake is amazing in reducing muzzle rise and felt recoil. -Quite stationary, indeed.
    And the Sako-style (AR-15-style) extractor is positive and easy on the brass.

    If you can handle a (brakeless) 7mm mag or a .300 WM - you can handle this rig in the field.

    $950. (Guncase included.)
    FREE S/H (All 50 States) to your loco FFL/Dealer.
    (Yes, so that even Lefty Hawaiians can shoot their distant relative and neighbor's coconuts. :D)

    Chris
    chris_59@q.com

    (307) 851-6011
    Email me for photos...

    I hear that Remington does not make any lefty BDL/LSS/CDL/SPS .338 RUMs anymore.
    http://www.remington.com/product-cat.../firearms.aspx
    Click on: Left-Hand Models
    -then CDL, SPS (Overview)
    -then SPECIFICATIONS for availability or discontinued.


    Firearm Defect Remington Lawsuit: firearm accidents www.rifflawfirm.com

    (Another reason to have that Timney trigger.)

    Timney triggers http://www.timneytriggers.com/sunshop/index.php?l=product_detail&p=9

    Review http://www.8541tactical.com/timney_review.php


    Douglas barrel: Remington Mag Sporter 6, Turned, Threaded, Chambered, Cut to Length, Crowned & Polished http://www.douglasbarrels.net/contours/


    Muzzle brake http://www.brownells.com/.aspx/pid=13070/Product/MUZZLE_BRAKE
    See: SPECS #2


    4+1-rd. Magazine extension http://www.tacticalcomponent.com/mag-xtender.htm


    Very (.Y.) soft LimbSaver recoil pad http://www.midwayusa.com/viewproduct/?productnumber=411646&cm_mmc=Froogle-_-Gunsmithing%20-%20Stockmaking%20Supplies%20%26%20Equipment-_-PriceCompListing-_-411646


    Remington 700 Bolt:
    Factory extractor VS Sako-style extractor
    (1-minute video)
    http://www.youtube.com/watch?v=7g-jgOtPLjM








    -gun)Look at these ballistits! uu===> (.Y.)
    http://www.accuratereloading.com/338rum.html


    Schwing!



    Coming Soon!
    ACME Kevlar-reinforced kok-muff.
    The "No-Dick-Down" muff.

     
    Last edited: Jan 11, 2011
  2. geargrinder

    geargrinder Well-Known Member

    Messages:
    1,972
    Joined:
    Nov 6, 2006
    Re: .338 Remington Ultra Mag - Model 700 LSS Rifle - Left-Hand (NEW PHOTOS)

    Why do you keep making a new post instead of just bumping?
     

  3. Lefty G-gear

    Lefty G-gear Well-Known Member

    Messages:
    669
    Joined:
    Sep 18, 2010
    Re: .338 Remington Ultra Mag - Model 700 LSS Rifle - Left-Hand (NEW PHOTOS)


    What is "bumping" ???? :rolleyes:
     
  4. Lefty G-gear

    Lefty G-gear Well-Known Member

    Messages:
    669
    Joined:
    Sep 18, 2010
    Re: .338 Remington Ultra Mag - Model 700 LSS Rifle - Left-Hand (NEW PHOTOS)

    I try to post photos with my ad - but - for some reason it will not.
    That's why I put a photo link to an ad that lets me post 5 photos.
    For more photos, email me.

    And where is the bump button? - so I don't have to keep posting new ads?
     
    Last edited: Dec 31, 2010
  5. geargrinder

    geargrinder Well-Known Member

    Messages:
    1,972
    Joined:
    Nov 6, 2006
    Re: .338 Remington Ultra Mag - Model 700 LSS Rifle - Left-Hand (NEW PHOTOS)

    Bumping is when you reply to your own post. It brings it up to the top of the list without starting a whole new thread.

    And you can you can also put the photos in a photobucket(or similar) account and link them so they show up here. That way people won't have to go somewhere else to get all the information.
     
  6. jcvibby

    jcvibby Non-Profit Sponsor

    Messages:
    617
    Joined:
    Mar 30, 2008
    Re: .338 Remington Ultra Mag - Model 700 LSS Rifle - Left-Hand (NEW PHOTOS)

    Who did the work on the gun? what is the muzzle diameter? Is the brake a vias or something else? Thanks
     
  7. Lefty G-gear

    Lefty G-gear Well-Known Member

    Messages:
    669
    Joined:
    Sep 18, 2010
    Re: .338 Remington Ultra Mag - Model 700 LSS Rifle - Left-Hand (NEW PHOTOS)

    Work done:

    LimbSaver recoil pad
    Denny's Guns, Cody, WY

    Timney Trigger and Sako extractor
    Shumaker Gun Works, Stephenville, TX

    Douglas barrel and muzzle brake
    Diamond Enterprises, Worland, WY

    Muzzle brake hole diameter = .358"
    Outside diamerter = .700
    -He said the bullet needs .010" clearance all around.
    That = .020" total. (.338 + .020 = .358)
    See SPECS #2
    http://www.brownells.com/.aspx/pid=1...t/MUZZLE_BRAKE

    And I installed the 4+1 magazine floorplate.

    Email me for better photos.
    chris_59@q.com
     
    Last edited: Dec 31, 2010
  8. jcvibby

    jcvibby Non-Profit Sponsor

    Messages:
    617
    Joined:
    Mar 30, 2008
    Re: .338 Remington Ultra Mag - Model 700 LSS Rifle - Left-Hand (NEW PHOTOS)

    Cool thanks, what's the barrel thickness just before the brake?
     
  9. Lefty G-gear

    Lefty G-gear Well-Known Member

    Messages:
    669
    Joined:
    Sep 18, 2010
    Re: .338 Remington Ultra Mag - Model 700 LSS Rifle - Left-Hand (NEW PHOTOS)


    .673"

    The diameter of he brake is .700.
     
    Last edited: Dec 31, 2010
  10. Saint Nick

    Saint Nick New Member

    Messages:
    2
    Joined:
    Dec 24, 2010
    Re: .338 Remington Ultra Mag - Model 700 LSS Rifle - Left-Hand (NEW PHOTOS)

    back to top
     
  11. Lefty G-gear

    Lefty G-gear Well-Known Member

    Messages:
    669
    Joined:
    Sep 18, 2010
  12. Lefty G-gear

    Lefty G-gear Well-Known Member

    Messages:
    669
    Joined:
    Sep 18, 2010
    Re: .338 Remington Ultra Mag - Model 700 LSS Rifle - Left-Hand (NEW PHOTOS)

    2011
    Happy New Year !
     
  13. Lefty G-gear

    Lefty G-gear Well-Known Member

    Messages:
    669
    Joined:
    Sep 18, 2010
    Re: .338 Remington Ultra Mag - Model 700 LSS Rifle - Left-Hand (NEW PHOTOS)

    Decision time!

    I have been offered $850 now, but I will give it a few more days for others to offer the $950.

    I'm already eating over $450 as it is.
     
  14. Lefty G-gear

    Lefty G-gear Well-Known Member

    Messages:
    669
    Joined:
    Sep 18, 2010
    Re: .338 Remington Ultra Mag - Model 700 LSS Rifle - Left-Hand (NEW PHOTOS)

    gun)Look at these ballistits! uu===> (.Y.)
    http://www.accuratereloading.com/338rum.html


    Schwing!



    Coming Soon!
    ACME Kevlar-reinforced kok-muff.
    The "No-Dick-Down" muff.