Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Sizing 6mm to .22
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="brian b" data-source="post: 57479" data-attributes="member: 2797"><p>apb,</p><p> I have found the slickest die for doing this it is the Hornady universal neck die they come in every caliber but they do tend to oversize your brass just a bit.(for example while making 6-284 brass out of lapua 6.5-284 I used the Hornady .257 universal neck die with the 6mm expander it worked perfect)</p><p>in your case just buy the 22cal. die then neck turn after and DO NOT neck ream.(you can neck turn first but then your necks will thicken as you size from 6 to 22 then you will have to turn a second time to get the correct thickness)</p><p>hope this helps,</p><p>B</p></blockquote><p></p>
[QUOTE="brian b, post: 57479, member: 2797"] apb, I have found the slickest die for doing this it is the Hornady universal neck die they come in every caliber but they do tend to oversize your brass just a bit.(for example while making 6-284 brass out of lapua 6.5-284 I used the Hornady .257 universal neck die with the 6mm expander it worked perfect) in your case just buy the 22cal. die then neck turn after and DO NOT neck ream.(you can neck turn first but then your necks will thicken as you size from 6 to 22 then you will have to turn a second time to get the correct thickness) hope this helps, B [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Sizing 6mm to .22
Top