Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Seating out heavy monolithic bullets in 7mm-08
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="180pilot" data-source="post: 627522" data-attributes="member: 3897"><p>My interest is,.. has short action magazine and 2.80" limit hamstringed the heavier long bullets in the 7mm-08 by reduction in powder charges? But then barrel length may have more to do with it, in my Sierra Manual a, 26" 7mm-08 shows 2700 fps with 150 gr. with 44.2 grains of 4350 and the .280 Rem with 22" barrel, same bullet, needs 51.3 grs. 4350 to get 2700.... Or put all the variables of two different rifles in a bag and shake them up......? Soon as I get some clean .308 brass sized just enough to loosely hold 7mm bullet, I'll have to see about how much powder will go behind a seated out bullet, without compressing it...Right Now new Rifle has to go back to factory.. deep reaming cuts in both lands and grooves are more then anyone should accept from Savage..</p></blockquote><p></p>
[QUOTE="180pilot, post: 627522, member: 3897"] My interest is,.. has short action magazine and 2.80" limit hamstringed the heavier long bullets in the 7mm-08 by reduction in powder charges? But then barrel length may have more to do with it, in my Sierra Manual a, 26" 7mm-08 shows 2700 fps with 150 gr. with 44.2 grains of 4350 and the .280 Rem with 22" barrel, same bullet, needs 51.3 grs. 4350 to get 2700.... Or put all the variables of two different rifles in a bag and shake them up......? Soon as I get some clean .308 brass sized just enough to loosely hold 7mm bullet, I'll have to see about how much powder will go behind a seated out bullet, without compressing it...Right Now new Rifle has to go back to factory.. deep reaming cuts in both lands and grooves are more then anyone should accept from Savage.. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Seating out heavy monolithic bullets in 7mm-08
Top