Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Screw holes w/o Threads
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Coyboy" data-source="post: 341343" data-attributes="member: 3733"><p>Nat, it's getting worse, I ordered a 17 fireball because zanders was closing them out and I was wanting to build a 6br, plug the ejector button and install a sako extractor. I figured it was as good as any to start with. I ordered the fancy varmit SS fluted HS stock model. </p><p></p><p>I pulled the barrel and about craped, I had never in my life seen barrel threads so undersized, were talkin rattle the action back and forth a half inch at the tang. The major od was 1.042" and they were cut to a sharp v on the tops. I figured I could pull the stock and barrel and sell them, well not the barrel! unless you want to screw it onto a Winchester!!!.</p></blockquote><p></p>
[QUOTE="Coyboy, post: 341343, member: 3733"] Nat, it's getting worse, I ordered a 17 fireball because zanders was closing them out and I was wanting to build a 6br, plug the ejector button and install a sako extractor. I figured it was as good as any to start with. I ordered the fancy varmit SS fluted HS stock model. I pulled the barrel and about craped, I had never in my life seen barrel threads so undersized, were talkin rattle the action back and forth a half inch at the tang. The major od was 1.042" and they were cut to a sharp v on the tops. I figured I could pull the stock and barrel and sell them, well not the barrel! unless you want to screw it onto a Winchester!!!. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Screw holes w/o Threads
Top