Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Savage Action Primary extraction, timing and cycling?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Dgd6mm" data-source="post: 1394612" data-attributes="member: 12044"><p>Probably just need to tweek the feed lips. Load the mag and take a look at how level the rounds lay in it. If level open the front up a little which will raise the tip of the bullet so it impacts the ramp a little higher making it easier to feed. If the round is tilted down then close rear of the lips at case head a little and open front a little. Take your time and with a little patience and observing you should be able to figure out what you need. MPA makes a tool for this for about $15.00. If you take a look at it you may be able to make something that will work. Most people use some sort of pliers. If you use pliers don't bare down and grip them hard enough to damage.</p></blockquote><p></p>
[QUOTE="Dgd6mm, post: 1394612, member: 12044"] Probably just need to tweek the feed lips. Load the mag and take a look at how level the rounds lay in it. If level open the front up a little which will raise the tip of the bullet so it impacts the ramp a little higher making it easier to feed. If the round is tilted down then close rear of the lips at case head a little and open front a little. Take your time and with a little patience and observing you should be able to figure out what you need. MPA makes a tool for this for about $15.00. If you take a look at it you may be able to make something that will work. Most people use some sort of pliers. If you use pliers don't bare down and grip them hard enough to damage. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Savage Action Primary extraction, timing and cycling?
Top