Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Savage 22-250, 12 failing to eject
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="liltank" data-source="post: 608449" data-attributes="member: 13275"><p>Could be the spring under the bearing in the ejector. If it is not putting enough pressure on the ejector it will slip out. Pull your plunger spring and stretch it a little too. As far as accuracy, did you do a barrel break in? How many rounds have you fired since new? Did you make sure to clean out all the copper with each cleaning? Something else you can do is set the timing in the bolt. If the cocking pin in the rear of the bolt is hitting the bolt housing, this can cause some accuracy issues. Dry fire the rifle. The bolt body should move forward in a straight motion. If it moves to the left or right, your cocking pin is contacting the bolt body. You can take the bolt apart and and adjust the rear firing spring tension adjuster. Just back it off 1 to 2 slots. Repeat the process. Another thing to do is while the bolt is apart, check the firing pin protrusion on the bolt face. It should only protrude .050-.055". Take something and push on the pin so that it sticks out the bolt face. Use calipers to check it.</p><p></p><p>Tank</p></blockquote><p></p>
[QUOTE="liltank, post: 608449, member: 13275"] Could be the spring under the bearing in the ejector. If it is not putting enough pressure on the ejector it will slip out. Pull your plunger spring and stretch it a little too. As far as accuracy, did you do a barrel break in? How many rounds have you fired since new? Did you make sure to clean out all the copper with each cleaning? Something else you can do is set the timing in the bolt. If the cocking pin in the rear of the bolt is hitting the bolt housing, this can cause some accuracy issues. Dry fire the rifle. The bolt body should move forward in a straight motion. If it moves to the left or right, your cocking pin is contacting the bolt body. You can take the bolt apart and and adjust the rear firing spring tension adjuster. Just back it off 1 to 2 slots. Repeat the process. Another thing to do is while the bolt is apart, check the firing pin protrusion on the bolt face. It should only protrude .050-.055". Take something and push on the pin so that it sticks out the bolt face. Use calipers to check it. Tank [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Savage 22-250, 12 failing to eject
Top