Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Savage 12LRP, 260 REM load fine tuning
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Sargesniper" data-source="post: 775682" data-attributes="member: 61726"><p>Kevin, you may want to try H-4350 as it may be better for velocity although you dont have to have a lot of velocity to get you to 1000 yds. It may even give you at least or better accuracy. The 130 gr. bullets will also get the job done at that range. If your group opens up as you say you may look at tweaking the bedding screws some. Start out with 40 in. lbs. on all three. Also make sure the rear tang is free floated as well as the barrel after the third shot. It could be as simple as that. If the barrel is touching anywhere, the shot will go off in the opposite direction of the pressure point. ( left pressure, right bullet strike). If you change components,change only one at a time. ( process of elimination). Hope this helps. ..... SEMPER FI!</p></blockquote><p></p>
[QUOTE="Sargesniper, post: 775682, member: 61726"] Kevin, you may want to try H-4350 as it may be better for velocity although you dont have to have a lot of velocity to get you to 1000 yds. It may even give you at least or better accuracy. The 130 gr. bullets will also get the job done at that range. If your group opens up as you say you may look at tweaking the bedding screws some. Start out with 40 in. lbs. on all three. Also make sure the rear tang is free floated as well as the barrel after the third shot. It could be as simple as that. If the barrel is touching anywhere, the shot will go off in the opposite direction of the pressure point. ( left pressure, right bullet strike). If you change components,change only one at a time. ( process of elimination). Hope this helps. ..... SEMPER FI! [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Savage 12LRP, 260 REM load fine tuning
Top