Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Hunting
Long Range Hunting & Shooting
Sako A7 accuracy issue
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="CNY Yote Hunter" data-source="post: 2834643" data-attributes="member: 109650"><p>Hey, was just reading through this thread and come across your comment. I am going to start load development on an A7 Long Range in 25-06 and am curious what load you had that shot well. I just loaded up some 100 ttsx's over 49 grains of H4350, 49.5 and 50 to do some grouping tests but haven't gone to the range yet. Brass used is from Barnes factory ammo, CCI 200 primers and seating them to 3.200 COAL, 2.685 CBTO as per the Nosler manual to start with. Neck tension I set at 2 thousandths. Hoping I'm close but the factory stuff I shot to get the brass from was 100 grain TTSX and shot a little over an inch at 100 so I wasn't to impressed. Just wondering if you'd care to share with me what worked best for you. Thanks!!</p></blockquote><p></p>
[QUOTE="CNY Yote Hunter, post: 2834643, member: 109650"] Hey, was just reading through this thread and come across your comment. I am going to start load development on an A7 Long Range in 25-06 and am curious what load you had that shot well. I just loaded up some 100 ttsx’s over 49 grains of H4350, 49.5 and 50 to do some grouping tests but haven’t gone to the range yet. Brass used is from Barnes factory ammo, CCI 200 primers and seating them to 3.200 COAL, 2.685 CBTO as per the Nosler manual to start with. Neck tension I set at 2 thousandths. Hoping I’m close but the factory stuff I shot to get the brass from was 100 grain TTSX and shot a little over an inch at 100 so I wasn’t to impressed. Just wondering if you’d care to share with me what worked best for you. Thanks!! [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Hunting
Long Range Hunting & Shooting
Sako A7 accuracy issue
Top