Reply to thread

Message: <blockquote data-quote="Ron-NJ" data-source="post: 1673795" data-attributes="member: 107702"><p>Tried it with and without the magazine in.  Bolt face is too big for the action.  You can see as the bolt approaches the chamber it stops as the action narrows.  The question wasn't about putting a smaller cartridge in the chamber it was would the gun cycle with the appropriate cartridge in the in the chamber with a smaller bolt.  My gun will not chamber any round because the bolt face is too big to seat all the way to the chamber.  But I was concerned if the sent another incorrectly sized bolt, this one smaller than 6.5PRC instead of bigger, if the gun would cycle.  It appears the opinion of people is that the gun would not cycle.</p></blockquote><p></p>