Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Ruger M77 Tang Safety HELP--removed all variables, still sucks.....
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="stomp442" data-source="post: 895259" data-attributes="member: 70571"><p>Every Ruger I have ever messed with which has been quite a few prefer fore end pressure. I will generally free float the barrel then place a small amount of steel stick putty right at the end of the stock. Place one piece of packing tape along the barrel where it contacts the fore arm. Apply some release agent then place a small ball of putty in the stock then install the barreled action normally and tighten down the screws with the middle screw only snugged up. 57.0 grains of H4350 and a 155 Berger vld set .025" from the lands has worked really well in the last two Ruger 06s that I have worked on. Good luck.</p></blockquote><p></p>
[QUOTE="stomp442, post: 895259, member: 70571"] Every Ruger I have ever messed with which has been quite a few prefer fore end pressure. I will generally free float the barrel then place a small amount of steel stick putty right at the end of the stock. Place one piece of packing tape along the barrel where it contacts the fore arm. Apply some release agent then place a small ball of putty in the stock then install the barreled action normally and tighten down the screws with the middle screw only snugged up. 57.0 grains of H4350 and a 155 Berger vld set .025" from the lands has worked really well in the last two Ruger 06s that I have worked on. Good luck. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Ruger M77 Tang Safety HELP--removed all variables, still sucks.....
Top