Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
RL33 and 338 RUM WITH 300 GR Accubond
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="D.Camilleri" data-source="post: 1184037" data-attributes="member: 2567"><p>I have been playing with Rl33 for the past 8 weeks between cleaning out the carbon fouling from my barrel. My load development has been with the 300 gr Nosler Accubond seated to magazine length of 3.670. 100 grs netted 2820, 101 netted 2857 and todays load of 102grs yielded 2895. None of these loads exibited any pressure signs, stiff bolt or ejector marks. This is a heavily compressed load, and the SD on the 101 gr load was 8 as viewed from the Magnetor speed chrono. 101 shot about a 3/4 inch group, 102 was spread right to left quite a bit, but vertical was very good.</p><p></p><p>My goal was to get to 2900 fps with a 300 gr Accubond and I was able to achieve this goal. Now if I can shrink the group all will be good. I might try changing the seating depth to see if anything changes.</p></blockquote><p></p>
[QUOTE="D.Camilleri, post: 1184037, member: 2567"] I have been playing with Rl33 for the past 8 weeks between cleaning out the carbon fouling from my barrel. My load development has been with the 300 gr Nosler Accubond seated to magazine length of 3.670. 100 grs netted 2820, 101 netted 2857 and todays load of 102grs yielded 2895. None of these loads exibited any pressure signs, stiff bolt or ejector marks. This is a heavily compressed load, and the SD on the 101 gr load was 8 as viewed from the Magnetor speed chrono. 101 shot about a 3/4 inch group, 102 was spread right to left quite a bit, but vertical was very good. My goal was to get to 2900 fps with a 300 gr Accubond and I was able to achieve this goal. Now if I can shrink the group all will be good. I might try changing the seating depth to see if anything changes. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
RL33 and 338 RUM WITH 300 GR Accubond
Top