Rl 26 loads

Here is my initial load development with RL-26 and my .260 Ackley

Hornady 147 ELD-M, seated .050" off (C.O.L. of 2.865)
Lapua .260 brass formed
CCI BR-2 primer
Temperature while firing was 20 degrees F

48 gr:
1. 2843
2. 2877
3. 2865 // 2861 Avg., 34 fps E.S.

48.5 gr:
1. 2966
2. 2988
3. 2982 // 2978 Avg., 22 fps E.S.

49 gr:
1. 2977
2. 3006
3. 3022 // 3008 Avg., 25 fps E.S.

49.5 gr:
1. 3043
2. 3040
3. 3043 // 3042 Avg., 3 fps E.S.

50 gr:
1. 3043
2. 3073
3. 3059 // 3058 Avg., 30 fps E.S.

50.5 gr:
1. 3096
2. 3102
3. 3078 // 3092 Avg., 24 fps E.S.
 
Here is my initial load development with RL-26 and my .260 Ackley

Hornady 147 ELD-M, seated .050" off (C.O.L. of 2.865)
Lapua .260 brass formed
CCI BR-2 primer
Temperature while firing was 20 degrees F

48 gr:
1. 2843
2. 2877
3. 2865 // 2861 Avg., 34 fps E.S.

48.5 gr:
1. 2966
2. 2988
3. 2982 // 2978 Avg., 22 fps E.S.

49 gr:
1. 2977
2. 3006
3. 3022 // 3008 Avg., 25 fps E.S.

49.5 gr:
1. 3043
2. 3040
3. 3043 // 3042 Avg., 3 fps E.S.

50 gr:
1. 3043
2. 3073
3. 3059 // 3058 Avg., 30 fps E.S.

50.5 gr:
1. 3096
2. 3102
3. 3078 // 3092 Avg., 24 fps E.S.

Wow that is impressive! Your loads are outrunning my cousin's 6.5-284 with 55gr of Retumbo and a 28" barrel. He is getting 2950fps and I thought that was good for the 147! Haha, this RL26 is some good stuff from what I've been seeing.
 
Off topic, but where are you guys ordering RL-26? I cannot find any locally and I have looked everywhere online and it's out of stock on every site. Thanks
Graf's seems to have plenty of whatever I need when I need it and I picked up 3lbs of RL26 from them last week. They show to be out right now but if I were you I'd just keep checking every few days .
 
Warning! This thread is more than 8 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top