Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Rifle won't chamber round
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="skipglo" data-source="post: 2010400" data-attributes="member: 87776"><p>I would s</p><p></p><p>I would spray a liberal dose of good lube like WD 40 into the chamber and run a stiff wire brush thru from the front of the barrel towards the magazine...if there is anything in the chamber you don't want to push it further into the barrel....Ross 1147 also had a good idea as the same happened to me....check the bolt face first as it only takes a few small particles in the ring around the face to make it impossible to close the bolt and push the case to far forward to the lands</p></blockquote><p></p>
[QUOTE="skipglo, post: 2010400, member: 87776"] I would s I would spray a liberal dose of good lube like WD 40 into the chamber and run a stiff wire brush thru from the front of the barrel towards the magazine...if there is anything in the chamber you don't want to push it further into the barrel....Ross 1147 also had a good idea as the same happened to me....check the bolt face first as it only takes a few small particles in the ring around the face to make it impossible to close the bolt and push the case to far forward to the lands [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Rifle won't chamber round
Top