remington 338 LMR loafds data

Discussion in 'Reloading' started by jacack, Jun 9, 2013.

  1. jacack

    jacack Well-Known Member

    Sep 21, 2002
    Just looking to see if anyone has any 250 and 300grn loads they want to share. I sold my 98bravo a while back and tried the load i shot in it in the Remington but it didnt care for it at all. I was thinking h1000 with 300mks but just thought i would check here as i know there are a few guys on here that shoot them.

  2. Nimrodmar10

    Nimrodmar10 Well-Known Member

    Aug 21, 2011
    First off, let me say that this is a MAX load in my Remington 700P 338 Lapua. Drop back at least 5 grains and work up.

    Sierra 300 gr. SMK
    91.5 gr. H1000
    Fed. 215M Primers
    3.710" COAL
    Lapua Brass

    If any of your components are different than these, drop back a couple more grains and work up. The 3.710" COAL is a .010" Jam into the lands so you might want to measure to your lands and back off .040" to start.

    This is the most accurate load in my rifle, but as you know, all guns are different.

    Good Luck