Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Rem 700 ADL Long Action Build Options...
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Kevin Cram" data-source="post: 471364" data-attributes="member: 2215"><p>It's no big thing to make your 30-06 into a 338 RUM. You'll need to open up the bolt face of course. A sako extractor conversion will fix you up great and cost around $100 installed. As mentioned a Wyatts extended mag box in either the MBE3 for the staggered feed or the CFE9 for the center feed. The MBE3 has an internal case capacity of 3.825" and the CFE9 has an internal case capacity of 3.99" . The actions magazine mortise will need to be altered, the feed rails opened up to accept the larger case and the bolt stop modified as well. The MBE3 with installation will run about $85. The CFE9 with installation will run about $125. The CFE9 is great because your almost guaranteed not to have feeding problems with a center feed mag box.</p></blockquote><p></p>
[QUOTE="Kevin Cram, post: 471364, member: 2215"] It's no big thing to make your 30-06 into a 338 RUM. You'll need to open up the bolt face of course. A sako extractor conversion will fix you up great and cost around $100 installed. As mentioned a Wyatts extended mag box in either the MBE3 for the staggered feed or the CFE9 for the center feed. The MBE3 has an internal case capacity of 3.825" and the CFE9 has an internal case capacity of 3.99" . The actions magazine mortise will need to be altered, the feed rails opened up to accept the larger case and the bolt stop modified as well. The MBE3 with installation will run about $85. The CFE9 with installation will run about $125. The CFE9 is great because your almost guaranteed not to have feeding problems with a center feed mag box. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Rem 700 ADL Long Action Build Options...
Top