Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Reloading to Mag Length?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="YZ-80" data-source="post: 2951246" data-attributes="member: 109229"><p>Guys, </p><p></p><p>Just got a new RRA Predator in the dreaded Creedmore. I function tested it today and all went pretty well. I did have one out of 22 rounds where the gun did not go into full battery. Otherwise things functioned fine but I think I might be a little long. My Hornady OAL gauge won't work in this application and I tried the Sharpie routine and could not make heads or tails out of it. My rounds are at 2.768" and the published COL (Hornady 123 SST) is 2.710". Using just the bullet comparator, CBTO is 2.180". Anyway, look at these pictures and let me know if the bearing surface looks reasonable and the mag clearance (I measured it at between 5 and 6 100ths). I just don't want to be jamming things and causing problems down the road. I thought about seating them .030 deeper but wanted some opinions first. Thanks!</p><p></p><p></p><p>[ATTACH=full]512391[/ATTACH][ATTACH=full]512392[/ATTACH][ATTACH=full]512393[/ATTACH]</p></blockquote><p></p>
[QUOTE="YZ-80, post: 2951246, member: 109229"] Guys, Just got a new RRA Predator in the dreaded Creedmore. I function tested it today and all went pretty well. I did have one out of 22 rounds where the gun did not go into full battery. Otherwise things functioned fine but I think I might be a little long. My Hornady OAL gauge won’t work in this application and I tried the Sharpie routine and could not make heads or tails out of it. My rounds are at 2.768” and the published COL (Hornady 123 SST) is 2.710”. Using just the bullet comparator, CBTO is 2.180”. Anyway, look at these pictures and let me know if the bearing surface looks reasonable and the mag clearance (I measured it at between 5 and 6 100ths). I just don’t want to be jamming things and causing problems down the road. I thought about seating them .030 deeper but wanted some opinions first. Thanks! [ATTACH type="full"]512391[/ATTACH][ATTACH type="full"]512392[/ATTACH][ATTACH type="full"]512393[/ATTACH] [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Reloading to Mag Length?
Top