Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
reloading question
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="william101" data-source="post: 88149" data-attributes="member: 4819"><p>Thanks guys!I appreciate the helpful advice.Sorry took so long for a response.Been hunting my arse off,Good ole whitetails are nowjust starting to rut here.</p><p>After I posted for the second time,I really got antsy and wanted to figure what was going on,I called RCBS and talked to a lady and described my delema,she told me that they have had this problem also with the new 325 WSM dies as well.She told me to send my dies along with 5 fired shells and that they would machine my dies and correct the problem,well its the middle of hunting season and this was not an option!!so I went back into the reloading room up at my cousins and began fidling around with the dies,and re-reading the small amount of material for setup in the rcbs manual.In my fiddling around stage ,I reset the sizing die as recomended,then I rotated the sizing die about two turns down even further and stuck a case in the shell holder and gave it a try,I gave the handle a little more then normal tension and then removed the case and tried it in my chamber and shut the bolt.It closed perfectly and the stiffness was gone!!Soo I reexamined the case and everything was fine.So I reloaded about 20 shells this way,ran up the hill to his shooting range and fired 3 rounds,and all was well.Anyways it worked out all right.Thanks again for the help.</p></blockquote><p></p>
[QUOTE="william101, post: 88149, member: 4819"] Thanks guys!I appreciate the helpful advice.Sorry took so long for a response.Been hunting my arse off,Good ole whitetails are nowjust starting to rut here. After I posted for the second time,I really got antsy and wanted to figure what was going on,I called RCBS and talked to a lady and described my delema,she told me that they have had this problem also with the new 325 WSM dies as well.She told me to send my dies along with 5 fired shells and that they would machine my dies and correct the problem,well its the middle of hunting season and this was not an option!!so I went back into the reloading room up at my cousins and began fidling around with the dies,and re-reading the small amount of material for setup in the rcbs manual.In my fiddling around stage ,I reset the sizing die as recomended,then I rotated the sizing die about two turns down even further and stuck a case in the shell holder and gave it a try,I gave the handle a little more then normal tension and then removed the case and tried it in my chamber and shut the bolt.It closed perfectly and the stiffness was gone!!Soo I reexamined the case and everything was fine.So I reloaded about 20 shells this way,ran up the hill to his shooting range and fired 3 rounds,and all was well.Anyways it worked out all right.Thanks again for the help. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
reloading question
Top