Reloading Newbie

aponcelet1

Member
Joined
Mar 26, 2012
Messages
21
New to reloading looking for load information for 7mm rem. Mag. Gun has 26 inch Barrel. Appreciate any information.
 
These were given to me from Walt Berger of Berger bullet. You didn't specify anything in your post. These loads are for a 180gr Berger VLD

Load data was generated using Quick Load a 26 inch barrel a COAL (cartridge over all length) of 3.290 inches and your COAL and velocity could be a little different.
AS WITH ALL RELOADING APPROACH THE MAXIMUM LOADS WITH CAUTION AS ALL RIFLES AND RELOADING TECHNIQUES WILL BE DIFFERENT. If YOU CHANGE ANY OF YOUR COMPONENTS; THIS INCLUDES DIFFERENT POWDER LOT NUMBERS; YOU MUST REFIGURE YOUR LOADS BY STARTING WITH THE MINIMUM LOAD.

7mm REMINGTON MAGNUM
Bullet Powder Start Load Approx Start Vel Max Load Approx Max Vel Fill Ratio
180 Grain IMR 7828 SSC 58.0 2627 61.3 2821 91.3%
180 Grain H4831 SC 56.5 2587 61.2 2792 92.5%
180 Grain RE-25 60.5 2700 63.7 2831 98.0%
180 Grain H1000 62.5 2672 66.0 2830 102.1%
180 Grain NORMA MRP2 62.0 2683 65.5 2838 100.2%
180 Grain AA Mag Pro 61.0 2671 64.4 2824 93.0%
180 Grain Ram Shot Mag 63.5 2692 66.8 2844 95.5%
180 Grain VIHT N560 58.5 2692 61.5 2826 90.2%
180 Grain H4350 52.5 2570 57.2 2743 86.8%
180 Grain RETUMBO 63.5 2635 69.2 2881 105.1%
180 Grain VIHT N165 58.0 2585 61.3 2720 93.8%
180 Grain RE-22 57.0 2628 60.3 2771 91.2%
180 Grain IMR 4831 53.5 2594 56.6 2719 86.6%
180 Grain Hybrid 100V 53.0 2606 56.0 2720 91.7%
180 Grain IMR 4350 51.0 2512 55.7 2705 85.5%

 
New to reloading looking for load information for 7mm rem. Mag. Gun has 26 inch Barrel. Appreciate any information.

Welcome to LRH and enjoy!

What is the intended purpose? Target? Hunting (what game)? Range?

If hunting, where? - for temp sensitivity considerations.

Is there a certain bullet you have in mind?

Any pertinent info would be helpful to narrow down your requirements.

Ed
 
Sorry about the lack of information. Going to be used for whitetail but shots can be from 50 yards to 300 open range and brush so i am looking for loads that will work for both. I just picked the 7mm up about 3 months ago.
 
Hodgdon has an on line data center where you can find almost any load you might need.Use their site all the time.gun)
 
Warning! This thread is more than 13 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top