Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
reloading - case length to ogive 7mm
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Corey Schwanz" data-source="post: 1130380" data-attributes="member: 85383"><p>As said, different bullets with different ogive shapes will give you different results. The bearing surface of both bullets may be touching the rifling, but where the comparator actually touches and measures on the bullet from will be different from each other. Also, if you get a different comparator, you are likely to see different measurements as well.</p><p> </p><p>But if you use the same comparator to measure the same spot on the any given bullet, you can have a good reference point to base future loads from as long as you stick with that bullet. When you change bullets, you have to re-measure to get a new baseline.</p></blockquote><p></p>
[QUOTE="Corey Schwanz, post: 1130380, member: 85383"] As said, different bullets with different ogive shapes will give you different results. The bearing surface of both bullets may be touching the rifling, but where the comparator actually touches and measures on the bullet from will be different from each other. Also, if you get a different comparator, you are likely to see different measurements as well. But if you use the same comparator to measure the same spot on the any given bullet, you can have a good reference point to base future loads from as long as you stick with that bullet. When you change bullets, you have to re-measure to get a new baseline. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
reloading - case length to ogive 7mm
Top