Reply to thread

Message: <blockquote data-quote="Gone Ballistic" data-source="post: 1860054" data-attributes="member: 26477"><p>Just a piece of advice from a guy who has been reloading over 60 years. When you see a load that says "Most accurate load tested " don't assume it will be produce the same result for your rifle. First, take a look at the test rifle and barrel length that produced the results of all the loads printed. If your rifle has the same twist and barrel length you might get close results. But, if your rifle has a different twist and/ or barrel length, that "best accuracy " you are looking at might be your least accurate load. I usually look at different results of different powders and reload from 10% below the published loads of at least 3 different powders. Then I work them up into their best groups using the bullet I intend shooting.</p></blockquote><p></p>