Reciever/Factory BM

Discussion in 'Gunsmithing' started by cuutter, Mar 6, 2012.

  1. cuutter

    cuutter Well-Known Member

    Messages:
    62
    Joined:
    Jul 15, 2008
    Hello everyone, I ran into this problem today and don't know what to do. While putting this rifle togather I found that the reciever didn't have a lip on the bottom to catch the factory follower. I looked at another reciever I had and it has a lip on the bottom on it to catch the follower. I have encluded pictures of both reciever's. Other than installing a DBM on this reciever is there anything else I can do.
    Thanks for your help.
    Wayne

    [​IMG]

    [​IMG]
     
  2. grit

    grit Well-Known Member

    Messages:
    1,375
    Joined:
    Mar 23, 2005
    Center feed mag box. Look at Wyatts outdoors.