Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
reamers/chambering
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="elkaholic" data-source="post: 2852983" data-attributes="member: 13833"><p>Good points. For a magnum case head, your die needs to be .005" under chamber or with spring back, etc you WILL get clickers. likewise, the chamber should be .005" over the new brass you're using.</p><p>for a .470 case, a minimum of .004" under. if your brass isn't at least .0015" under chamber at the web when its sized, it will stick when extracting.</p><p>You might get away with slightly less, but your pushing your luck. Lapua size, .006"-.007 less than chamber on the dies</p></blockquote><p></p>
[QUOTE="elkaholic, post: 2852983, member: 13833"] Good points. For a magnum case head, your die needs to be .005" under chamber or with spring back, etc you WILL get clickers. likewise, the chamber should be .005" over the new brass you're using. for a .470 case, a minimum of .004" under. if your brass isn't at least .0015" under chamber at the web when its sized, it will stick when extracting. You might get away with slightly less, but your pushing your luck. Lapua size, .006"-.007 less than chamber on the dies [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
reamers/chambering
Top