Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
RCBS UNIVERSAL CASE PREP CENTER
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="seidersjoden" data-source="post: 1432699" data-attributes="member: 56644"><p>I have the RCBS universal case prep center, looking to PM someone that has used it and ask a few questions. For starters I heard there's a few things you have to know to get the most out of it based on reviews. </p><p></p><p>For example from reviews: </p><p> 1.- Get the carbide tools!! The tools that come with it will wear out after a few hundred rounds. If you want to really speed things up get an RCBS three way cutter for the calibers you'll be trimming. 2.- Replace the plastic shell holder thumb screws with some brass thumb screws. It's very difficult to torque the plastic thumb screws enough to securely hold the shell holder in place. 3.- Adjust the shaft so that there is NO PLAY in it what-so-ever. Push it all the way towards the cutter guide carriage and make sure there is no gap between the cutter head and bushing. 4.- Using the fine adjustment micrometer, crank the shell holder carrier as far back as it will go. Try to put as much spring tension on the carrier as possible </p><p></p><p><a href="https://www.midwayusa.com/product/135727/rcbs-universal-case-prep-center-110-volt" target="_blank">https://www.midwayusa.com/product/135727/rcbs-universal-case-prep-center-110-volt</a></p><p></p><p>Any advice would be great. </p><p>Thanks</p><p>Joden</p></blockquote><p></p>
[QUOTE="seidersjoden, post: 1432699, member: 56644"] I have the RCBS universal case prep center, looking to PM someone that has used it and ask a few questions. For starters I heard there’s a few things you have to know to get the most out of it based on reviews. For example from reviews: 1.- Get the carbide tools!! The tools that come with it will wear out after a few hundred rounds. If you want to really speed things up get an RCBS three way cutter for the calibers you'll be trimming. 2.- Replace the plastic shell holder thumb screws with some brass thumb screws. It's very difficult to torque the plastic thumb screws enough to securely hold the shell holder in place. 3.- Adjust the shaft so that there is NO PLAY in it what-so-ever. Push it all the way towards the cutter guide carriage and make sure there is no gap between the cutter head and bushing. 4.- Using the fine adjustment micrometer, crank the shell holder carrier as far back as it will go. Try to put as much spring tension on the carrier as possible [URL]https://www.midwayusa.com/product/135727/rcbs-universal-case-prep-center-110-volt[/URL] Any advice would be great. Thanks Joden [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
RCBS UNIVERSAL CASE PREP CENTER
Top