rcbs trim mate

Discussion in 'Reloading' started by bushwacker09, Mar 14, 2012.

  1. bushwacker09

    bushwacker09 Member

    Messages:
    10
    Joined:
    May 13, 2009
    Hello all got a new rcbs trim mate prep station. all works fine except the outside deburring tool.screwed it in and out dosent seem 2 cut more work than the old do it by hand tool. just curiours if me or orthers ran into same problem..
     
  2. lamiglas

    lamiglas Well-Known Member

    Messages:
    603
    Joined:
    Mar 20, 2008
    I had the same problem. I bought a new hand tool cut it in half, soldered a threaded rod on each Rr piece (cut off from an arrow field point I think) Anyway, I replaced the one it came with and now it works great
     

  3. bushwacker09

    bushwacker09 Member

    Messages:
    10
    Joined:
    May 13, 2009
    Thanks lamiglass ill give it a try..
     
  4. lamiglas

    lamiglas Well-Known Member

    Messages:
    603
    Joined:
    Mar 20, 2008
    I was very disapointed in mine until I did thid. Now it works awesome. shouldnt have to do this for the money they cost though. Good luck