brush_buster
Well-Known Member
I have loaded 10 shells with my new rangemaster. Now when I try to calibrate it I get an error message when I put the large weight on. Does anyone know how to override the error message?
-
You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.
We offer multiple options to become a Supporting Member here.
SOLD/EXPIRED RCBS RangeMaster 750
- Thread starter brush_buster
- Start date
Help Support Long Range Hunting Forum
37L1
Well-Known Member
- Joined
- Jan 25, 2009
- Messages
- 154
Did you try de-powering the unit and see if it will "reboot"? Disconnect the power supply and the battery. Sometimes works with other instruments. . .
Don't know if it would work with the 750 but it's worth a shot.
Overriding the calibration process is probably not a good thing anyway. You want accurate loads and there just may be a problem with the scale and its accuracy that's why you may be getting the message.
Hope that is not the case but good luck anyway!
Don't know if it would work with the 750 but it's worth a shot.
Overriding the calibration process is probably not a good thing anyway. You want accurate loads and there just may be a problem with the scale and its accuracy that's why you may be getting the message.
Hope that is not the case but good luck anyway!
brush_buster
Well-Known Member
Thank you for your reply. Yes, I did disconnect the power but nothing happened.
DB
DB
