RCBS handpriming tool

Discussion in 'Reloading' started by linksmechanic, Feb 6, 2007.

  1. linksmechanic

    linksmechanic Well-Known Member

    Messages:
    668
    Joined:
    Jan 16, 2007
    Is there any way to adjust the seating depth on this tool? My primers are a skiff to high.
     
  2. jb1000br

    jb1000br Well-Known Member

    Messages:
    1,307
    Joined:
    Jul 8, 2003
    Call RCBS and tell them this...they will send you new guts...the pivot point wears out...problem solved.

    JB
     

  3. linksmechanic

    linksmechanic Well-Known Member

    Messages:
    668
    Joined:
    Jan 16, 2007
    Thanks. The thing has only primed about 300 cases.
     
  4. jb1000br

    jb1000br Well-Known Member

    Messages:
    1,307
    Joined:
    Jul 8, 2003
    hmmm...then you still need to call them, cause something isn't right. /ubbthreads/images/graemlins/frown.gif

    I have done several thou with mine, on the 2nd set of guts after it started seating near flush. Now back to 3-4thou under flush.


    JB
     
  5. Roll-Yur-Own

    Roll-Yur-Own Well-Known Member

    Messages:
    630
    Joined:
    Jul 3, 2006
    I have a RBCS bench mounted unit and the pin for large primers was too short. They sent me a new one and problem solved. Perhaps you have a similar problem?