RCBS Full Length Bushing Resizer Die

Martinpox

Member
Joined
Jun 12, 2017
Messages
11
Location
Central Idaho
Question, and I know I should search for the answer. But I like my Redding Neck sizer for the 6.5 PRC. But I want to push my shoulders back just a touch. So my wife can close the action without needing a cheater pipe. So the question is can I use the RCBS full length bushing resizing die withOUT the depriming pin and neck sizing?

Thinking I would resize first (push shoulders back .001-.003), then run through my Redding neck sizer.

Ideas, opinions please.

Thanks

Martin
 
If it's a "full length bushing resizing die " then you can bump while neck/partial neck sizing.
But yeah, you can also separate actions.


Ok perfect, I figured I could leave the depriming pin/expander out and the neck bushing and just bump the shoulders and FL size. Good deal. Thanks again
 
Warning! This thread is more than 5 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top