Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Quick Load help with 28 Nosler
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="nvreloader" data-source="post: 1252598" data-attributes="member: 6184"><p>Maninthemaze,</p><p></p><p>If you want to provide the following info, as accurately as possible,</p><p>I can run some QL "What if's", and provide the results, if you are interested.</p><p></p><p>This QL info will be the lowest safe starting loads, </p><p>for bullet/powder combo's etc.</p><p></p><p>1. Bbl length, from breech face to end of rifling, (closest 1/8").</p><p>2. H20 capacity of fired cases in YOUR chamber, (not resized).</p><p>3. Case trimmed length for you chamber.</p><p>4. Cartridge OVERALL loaded length.</p><p>(that fits your chamber, seated with bullet jumped or into the lands etc.)</p><p>5. Bullet brand name/number, you want to test.</p><p>6. Powders you want to use or have on hand.</p><p>7. Powder load ratio of case,(75%-80%-90% filled with powder, </p><p>QL suggests a minimum of 75% case filled).</p><p></p><p>Tia,</p><p>Don</p></blockquote><p></p>
[QUOTE="nvreloader, post: 1252598, member: 6184"] Maninthemaze, If you want to provide the following info, as accurately as possible, I can run some QL "What if's", and provide the results, if you are interested. This QL info will be the lowest safe starting loads, for bullet/powder combo's etc. 1. Bbl length, from breech face to end of rifling, (closest 1/8"). 2. H20 capacity of fired cases in YOUR chamber, (not resized). 3. Case trimmed length for you chamber. 4. Cartridge OVERALL loaded length. (that fits your chamber, seated with bullet jumped or into the lands etc.) 5. Bullet brand name/number, you want to test. 6. Powders you want to use or have on hand. 7. Powder load ratio of case,(75%-80%-90% filled with powder, QL suggests a minimum of 75% case filled). Tia, Don [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Quick Load help with 28 Nosler
Top