Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Question about 300 wsm
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="D.P." data-source="post: 152185" data-attributes="member: 2541"><p>The 300 will work fine with lighter bullets. Mine is built on a S/A 700 with an HS magazine, Min. SAAMI spec chamber. The HS box is on the short side, but holds the 175 smk loaded at the lands. Like JE said with heavy bullets there are better ways to go. A 190 smk starts to dip into the powder with my combo. </p><p></p><p>Since you plan on lighter bullets either the 7 or 300 work fine. If you wanted to take advantage of the heavy high BC the 7 might be nice. But the 300 set up right will get you at least to a 175 SMK which has been working well out to 1K</p></blockquote><p></p>
[QUOTE="D.P., post: 152185, member: 2541"] The 300 will work fine with lighter bullets. Mine is built on a S/A 700 with an HS magazine, Min. SAAMI spec chamber. The HS box is on the short side, but holds the 175 smk loaded at the lands. Like JE said with heavy bullets there are better ways to go. A 190 smk starts to dip into the powder with my combo. Since you plan on lighter bullets either the 7 or 300 work fine. If you wanted to take advantage of the heavy high BC the 7 might be nice. But the 300 set up right will get you at least to a 175 SMK which has been working well out to 1K [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Question about 300 wsm
Top