Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Question about 240 Wby
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Mullet" data-source="post: 157543" data-attributes="member: 8691"><p>The above information is incorrect.The belt on a 240 Weatherby is no larger than the web of 30/06 or 6mm/06, and a 6mm/06 reamer will completely clean out a 240 chamber, with the exception of about 1/8 th of an inch in the shoulder region.</p><p>I would sugest that a setback of 1/4 of an inch for the barrel would be a good idea to get a bit of clear throat for the reamer to centre on, unless the barrel is worn worse than that.</p></blockquote><p></p>
[QUOTE="Mullet, post: 157543, member: 8691"] The above information is incorrect.The belt on a 240 Weatherby is no larger than the web of 30/06 or 6mm/06, and a 6mm/06 reamer will completely clean out a 240 chamber, with the exception of about 1/8 th of an inch in the shoulder region. I would sugest that a setback of 1/4 of an inch for the barrel would be a good idea to get a bit of clear throat for the reamer to centre on, unless the barrel is worn worse than that. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Question about 240 Wby
Top