Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Pulling Bullets
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="scope-eye" data-source="post: 2165016" data-attributes="member: 21274"><p>This is the way I do them, when you get a rhythm going you can do a lot of them in a short time.</p><p>Make sure you use a cable cutter and not side cutters aka dykes, it's a very smoth operation and the cable cutters leave only two of the smallest marks on the bullet, "nothing that the rifling won't smooth out" and if the bullets have that seating line in them even better, it has not affected accuracy at all When I have reused them . If the marks are deep you are putting to much force on the cable cutters, it does not take much to hold them in place, they arm on the press does all the work. For those curious about the round in the pic it is a 6mm WSM it has a pet name Mr Nasty.LOL it shoots 105gr and 107s at 4000fps plus and 55g 5000fps plus.</p><p>This has been a public service announcement.</p><p></p><p>Dean</p><p></p><p>PS: This has always worked for me your millage may vary.</p><p>[ATTACH=full]265088[/ATTACH]</p><p>[ATTACH=full]265089[/ATTACH]</p></blockquote><p></p>
[QUOTE="scope-eye, post: 2165016, member: 21274"] This is the way I do them, when you get a rhythm going you can do a lot of them in a short time. Make sure you use a cable cutter and not side cutters aka dykes, it's a very smoth operation and the cable cutters leave only two of the smallest marks on the bullet, "nothing that the rifling won't smooth out" and if the bullets have that seating line in them even better, it has not affected accuracy at all When I have reused them . If the marks are deep you are putting to much force on the cable cutters, it does not take much to hold them in place, they arm on the press does all the work. For those curious about the round in the pic it is a 6mm WSM it has a pet name Mr Nasty.LOL it shoots 105gr and 107s at 4000fps plus and 55g 5000fps plus. This has been a public service announcement. Dean PS: This has always worked for me your millage may vary. [ATTACH type="full" alt="IMG_0395 (1).jpg"]265088[/ATTACH] [ATTACH type="full" alt="IMG_0398 (1).jpg"]265089[/ATTACH] [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Pulling Bullets
Top