products that improve accuracy

Discussion in 'Rifles, Bullets, Barrels & Ballistics' started by j_22250, Nov 29, 2007.

  1. j_22250

    j_22250 Well-Known Member

    Nov 25, 2007
    Read an article in hanloader magazine about a product called ultra bore coat that seemed to work.

    Also the tubb bore finish bullets how well do the work compared to other methods. I know for a fact that a small amount of 600 grit lapping compound works great when applied to the tip of the bullet and then fired.
  2. johngfoster

    johngfoster Active Member

    Sep 13, 2007
    Can't comment the other products, but the David Tubb Final Finnish system worked great for me. I had a 22-250 that would barely shoot 1" and often 2" @ 100yd. Sent it back to Reminton, who rebarreled it and told me I was shooting too hot loads (I had about 300 rounds down the tube, most handloads, but none chrono'd more than factory loads). Anyway, after the second barrel didn't shoot any better, I treated it to the Final Finnish system, and then was able to print 3/8" groups with factory ammo. Quite a difference in my experience.