Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
preasure problems with 7 ultra
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="harfman99" data-source="post: 288803" data-attributes="member: 10938"><p>the barrel is 31" and the load should be right in mid range for the data i received from Berger. My plaster cast did not come out very well in such a long chamber and was unable to get the measurements I wanted. I will call down to Shilen and ask if i can get a measurement off the reamer. I hate to try to do new load development trying to keep the round count down. I went ahead and cut the cases down to a standard 2.850 wich will take out that variable. I am also going to do a partial full leignth sizing being that the cases do chamber a little stiff. I have also lapped the heck out of the bore using jb bore paste hoping that this will help and smooth out the throat. the weather is supposed to cool down in the next couple days and will hope to get out to the range and see if any of this has helped. </p><p></p><p>thanks for all the info it is greatly appreciated.</p><p></p><p></p><p>Chris</p></blockquote><p></p>
[QUOTE="harfman99, post: 288803, member: 10938"] the barrel is 31" and the load should be right in mid range for the data i received from Berger. My plaster cast did not come out very well in such a long chamber and was unable to get the measurements I wanted. I will call down to Shilen and ask if i can get a measurement off the reamer. I hate to try to do new load development trying to keep the round count down. I went ahead and cut the cases down to a standard 2.850 wich will take out that variable. I am also going to do a partial full leignth sizing being that the cases do chamber a little stiff. I have also lapped the heck out of the bore using jb bore paste hoping that this will help and smooth out the throat. the weather is supposed to cool down in the next couple days and will hope to get out to the range and see if any of this has helped. thanks for all the info it is greatly appreciated. Chris [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
preasure problems with 7 ultra
Top