Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Polishing a body die?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="J E Custom" data-source="post: 836195" data-attributes="member: 2736"><p>Back off the die just a little until you get the fit you want Just like Bullet Bumper said.</p><p></p><p>First take the expander ball out so you don,t over work the case (One is all you need to use for this) </p><p>then size the fired brass and check it in the chamber. Keep turning the die down until you get the size/fit you want. Then lock the die in position, remove it from the press and re-install the expander </p><p>ball. You should be ready to load now. when you look at the case you may have a very small area of the neck that has not been sized, That's OK.</p><p></p><p>There is nothing wrong with your dies so don't polish or grind on them.</p><p></p><p>J E CUSTOM</p></blockquote><p></p>
[QUOTE="J E Custom, post: 836195, member: 2736"] Back off the die just a little until you get the fit you want Just like Bullet Bumper said. First take the expander ball out so you don,t over work the case (One is all you need to use for this) then size the fired brass and check it in the chamber. Keep turning the die down until you get the size/fit you want. Then lock the die in position, remove it from the press and re-install the expander ball. You should be ready to load now. when you look at the case you may have a very small area of the neck that has not been sized, That's OK. There is nothing wrong with your dies so don't polish or grind on them. J E CUSTOM [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Polishing a body die?
Top