planning a new project!

Discussion in 'Gunsmithing' started by Ridge Runner, Dec 20, 2007.

  1. Ridge Runner

    Ridge Runner Well-Known Member

    Messages:
    987
    Joined:
    Dec 13, 2002
    any smiths got a 22/6mm AI reamer? thinking about a new project. Thanx
    RR
     
  2. Kevin Cram

    Kevin Cram <b>SPONSOR</b>

    Messages:
    1,157
    Joined:
    Mar 9, 2004
    Hi Ridge Runner,
    I have a .22-.6mm Remington Ackley reamer with a .252 neck. I had the throat ground away so I can match the customers choice of bullet to the correct throat length with a throating reamer. Throating reamer has a 1 1/2 degree lead angle. With the article in American Rifleman on 1/2 mile .22's recently, I've had several requests for this cartridge.
     

  3. adam32

    adam32 Banned

    Messages:
    732
    Joined:
    Nov 14, 2007
    Hey RR, you might check out Weaver Rifles, he does a lot of wildcat stuff...
     
  4. Fiftydriver

    Fiftydriver <strong>Official LRH Sponsor</strong>

    Messages:
    6,848
    Joined:
    Jun 12, 2004
    I have that reamer, build alot of them.

    Kirby Allen(50)
     
  5. 338hammer

    338hammer Well-Known Member

    Messages:
    51
    Joined:
    Jan 10, 2008
    New project

    mcgowenbarrel.com click on barrels-scroll down

    338