Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Hunting
Crossbow Hunting
paper tuning
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="WildWillie" data-source="post: 557927" data-attributes="member: 29658"><p>Try checking the following:</p><p> </p><p>* Cam timing. It the white hash mark in the same position on each cam relative to the cable going over top of it.</p><p> </p><p>On both my cams the white line is directly underneath the top part of the cable when looking at it from the top.</p><p> </p><p>* Front end bolted down tight ? Check those two bolds that hold the riser to the rail.</p><p> </p><p>* Inspect both cams and make sure there is no gap between the cam and top/bottom limbs. There is a spacer under the cams that is plastic and can sometimes break.</p><p> </p><p>* Double check the Whisker biscuit mount screws. Make sure they are tight and the mount has no play in it.</p><p> </p><p>* Try another arrow (Fletched or Unfletched) to see if all arrows are inconsistant.</p><p> </p><p>I just got my Tac 15 paper tuned this morning (After limb replacement !!) It took about 20 shots to get things just right. (After the shop doing a rough paper tune) I only had to adjust the nock position about two turns to the right and adjust the biscuit down about 1/32nd on the right side.</p><p> </p><p>I shoot my x-bow free-hand standing about 10' in front of the paper which is about 4 ft in front of the target.</p><p> </p><p> </p><p>WildWillie</p></blockquote><p></p>
[QUOTE="WildWillie, post: 557927, member: 29658"] Try checking the following: * Cam timing. It the white hash mark in the same position on each cam relative to the cable going over top of it. On both my cams the white line is directly underneath the top part of the cable when looking at it from the top. * Front end bolted down tight ? Check those two bolds that hold the riser to the rail. * Inspect both cams and make sure there is no gap between the cam and top/bottom limbs. There is a spacer under the cams that is plastic and can sometimes break. * Double check the Whisker biscuit mount screws. Make sure they are tight and the mount has no play in it. * Try another arrow (Fletched or Unfletched) to see if all arrows are inconsistant. I just got my Tac 15 paper tuned this morning (After limb replacement !!) It took about 20 shots to get things just right. (After the shop doing a rough paper tune) I only had to adjust the nock position about two turns to the right and adjust the biscuit down about 1/32nd on the right side. I shoot my x-bow free-hand standing about 10' in front of the paper which is about 4 ft in front of the target. WildWillie [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Hunting
Crossbow Hunting
paper tuning
Top