Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Pac-Nor Polygonal barrel for 300wsm ???
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="1doug" data-source="post: 104001" data-attributes="member: 3863"><p>[ QUOTE ]</p><p> Davesok did Chris not make the barrel good?I have heard where he has replaced faulty barrels </p><p></p><p>[/ QUOTE ] </p><p></p><p>Sniper2 </p><p> that barell is on my gun, and no they did not make it right. they blamed machining abilitys and the reamer as the reasons for chattering. the shoulder chattered real bad from the start. we loped off a half inch and tested the hadrness. it came out to 23 on a rockwell tester with a calibration of .5+/-. We sent the barrel back to pac nor as well as the reamer and test piece. they short chambered the barrell with out the pilot installed and tested the test piece. the test they did, they said it was 28 rc but there error range was +/- 5 rc not the .5 that our tester had ( dave and i are in the military and everything we use gets calabrated at least yeary if not twice a year)</p><p></p><p>the broughton and krieger barrels we made at the same time, both machined flawlessly and were over 28 rc when we tested them. the same brand reamers were used for all the barrels. They were brand new Dave Manson reamers.</p><p></p><p> </p><p>so i will not buy another barrel from pac nor</p><p></p><p>d-a</p></blockquote><p></p>
[QUOTE="1doug, post: 104001, member: 3863"] [ QUOTE ] Davesok did Chris not make the barrel good?I have heard where he has replaced faulty barrels [/ QUOTE ] Sniper2 that barell is on my gun, and no they did not make it right. they blamed machining abilitys and the reamer as the reasons for chattering. the shoulder chattered real bad from the start. we loped off a half inch and tested the hadrness. it came out to 23 on a rockwell tester with a calibration of .5+/-. We sent the barrel back to pac nor as well as the reamer and test piece. they short chambered the barrell with out the pilot installed and tested the test piece. the test they did, they said it was 28 rc but there error range was +/- 5 rc not the .5 that our tester had ( dave and i are in the military and everything we use gets calabrated at least yeary if not twice a year) the broughton and krieger barrels we made at the same time, both machined flawlessly and were over 28 rc when we tested them. the same brand reamers were used for all the barrels. They were brand new Dave Manson reamers. so i will not buy another barrel from pac nor d-a [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Pac-Nor Polygonal barrel for 300wsm ???
Top