Overwhelmed..need ammo suggestions

Discussion in 'The Basics, Starting Out' started by Ranger260, Jan 6, 2011.

  1. Ranger260

    Ranger260 Member

    Messages:
    20
    Joined:
    Mar 25, 2010
    I was hoping you guys could help me find the price/performance "sweet spot" and help me narrow down some choices for ammo on my new rifle. I have perused this site and others for awhile and read a lot of the stickys. The more I read, the more I am overwhelmed by the choices. I would like to start examining the accuracy potential of this rifle, and would like to begin with some smart purchases on factory ammo (yes, I am one of those guys that needs to learn to reload). However, I do not want to throw money at the vendors haphazardly. I suppose I could load up on Black Hills, Bergers, Hornady or Federal Match and that would be a safe place to start. But that stuff is expensive and I am hoping for some alternatives.

    In the last year, I finally got around to putting together an AR-15 that I primarily intend to use for paper-punching (beyond 100 yards) and hunting (coyotes, jackrabbits, prairie dogs). Here are the specs on my rifle:
    20" Rock River Varmint A4 upper, 1 in 8" twist SS barrel
    Mohawk Lower
    Magpul PRS stock
    RR 2-stage trigger
    Vortex Viper 6.5-20x44mm scope
    Leupold Tactical rings
    Harris bipod

    With a firm grasp of the idea that I am the weakest link in this system, that every rifle and barrel are different, and that ammo varies from lot to lot...do you have any suggestions for some ammo I should try? BTW, I do have experience with the M16A2 platform and open sights. But I normally just shoot what is cheap or available with an eye for practical accuracy. I am new to precision/long-range shooting.

    I was hoping to start out with a modest purchase of around $100 on factory ammo to see what my rifle likes before I make an investment in a larger quantity. Here are some ideas I was looking at:

    Shoot for accuracy...
    http://www.ammunitiontogo.com/produ...ch-hollow-point-ammo/cName/223-556-match-ammo

    A cheaper alternative...
    Prvi Partizan .223 75grn Match HP 20rd tch+HP+20rd&groupid=21
    Prvi .223 69grn Boat Tail Match Hollow Point 20rd Box atch+Hollow+Point+20rd+Box&groupid=21
    http://www.ammunitiontogo.com/produ...75gr-bthp-match-ammo/cName/223-556-match-ammo

    For varmints...
    Fiocchi Extrema Ammunition 223 Remington 50 Grain Hornady V-Max Box of 50 - MidwayUSA
     
    Last edited: Jan 6, 2011
  2. timl

    timl Well-Known Member

    Messages:
    455
    Joined:
    Feb 11, 2006
    I'm a big fan of Black Hills remanufactured match ammo.
     

  3. mikebob

    mikebob Well-Known Member

    Messages:
    400
    Joined:
    Jun 4, 2006
    I have a h&r 223 that my daughter uses for plinking with why I am at the range, I buy wolf ammo 55gr for her to use. Its cheap and I can shoot 3 shots touching with it at 100yrds. Its cheap enough and good enough I dont bother to reload for it.
     
  4. KurtPiet

    KurtPiet Active Member

    Messages:
    39
    Joined:
    Mar 15, 2010
    I've used the 75 gr. Privi .223 in my Savage 110 fp and with it I can shoot 1/4 inch groups at a 100 yds. all day long. Working on get it out there at 1000 yds. and have some what of a grouping. I can get it out there but right now I wouldn't call it a group looks more like a scatter gun hit it at 50 yds.. But as with everything it will come with time.

    My Savage also likes the 62 gr. M855ss193 will shoot that into a 1/2 group at 100 yds. basically what I'm saying is that with practice almost any ammo will do a good job.
     
  5. diriel

    diriel Well-Known Member

    Messages:
    409
    Joined:
    Sep 22, 2010
    First off, if you are going to REALLY shoot .223, you may want to consider a Dillon Progressive setup. Trust me, reloading for an auto 223 is a *BLEEEEEEP* ;) A Dillon will save your sanity!

    IF you go Dillon Progressive, then I would most seriously consider:
    -- IMR8208XBR Powder
    -- Sierra 69gr SMK (truly excellent all around bullet)
    -- Lake City 09 brand new mfg brass (500 count) from Midway is actually quite good overall. And the price is nice at only $79 on sale. They also have 1k counts as well.
    -- Primers: either the Rem 7 1/2 or the Wolf SR-M

    With the IMR powder you *MIGHT* give up a small bit of pure speed, but not very dang much, especially with the 69gr bullets, and if you use the nice heavy mil brass. It also flows through the Dillon nicely.

    Good Shooting,
    Gary
     
    Last edited: Jan 7, 2011
  6. BigSkyGP

    BigSkyGP Well-Known Member

    Messages:
    332
    Joined:
    Nov 12, 2010
    If you want to weld a laquered steel case in an AR chamber go ahead and use wolf. Not to mention it burns super dirty and fouls up an AR too fast.

    Ultra Max remanufactured seems to work pretty well, and a lot cheaper than any brass cased ammo.

    Once you have a pile of brass, a dillon press will load you about as cheap as Ultra Max on sale, and you get to dial in the load to your rifle.

    With factory ammo you will get POI shifts lot to lot. That's why you by in bulk, or reload.
     
  7. Kevin Thomas

    Kevin Thomas Well-Known Member

    Messages:
    1,256
    Joined:
    Feb 16, 2009
    Ranger260

    I'd vote for the reloading, of course, but if you're just learning to do so, an AR isn't the platform to start with. Load for bolt guns first, and then move on to the gas guns. They're a form of advanced handloading, and need to be treated very differently than bolt guns where reloads are concerned. Get some experience with the less tempermental forms of reloading before venturing into this area.

    You're 1x8" will handle anything up to (and including) most 80s with no problems. I've used a fair amount of the Black Hills 77s, and have been pretty impressed with them. Federal and Hornady also turn out some pretty reasonable ammo in the heavier weights, and they'd also be worth a try.
     
  8. Ranger260

    Ranger260 Member

    Messages:
    20
    Joined:
    Mar 25, 2010
    I don't think I will be running any steel through this gun. As much as I am OK with steel for a fighting gun, I don't think the quality of the ammo will come close to the performance I am hoping for from this gun.
     
  9. Ranger260

    Ranger260 Member

    Messages:
    20
    Joined:
    Mar 25, 2010
    Gary, reloading is in my future, however it is not happening for me right now. I do like the Dillon press though! Thank you for sharing what works for you.

     
  10. Ranger260

    Ranger260 Member

    Messages:
    20
    Joined:
    Mar 25, 2010
    Kevin, Thanks for your input. I agree the AR is not the platform to initiate oneself into reloading. Heck, I feel that it was probably the wrong route to initiate myself into long-range shooting. However, the project evolved from something else, and this is what I have ended up with. So I would like to try and take advantage of what I have at the moment. Otherwise, I am jonesing for a .308 bolt gun in the worst way! But I can't see moving down that road without exploring the potential of the current project.

     
  11. BigSkyGP

    BigSkyGP Well-Known Member

    Messages:
    332
    Joined:
    Nov 12, 2010
    I wouldn't worry too much about reloading for the AR. Full Langth resing works fine. Small Base dies work better. Other than that I don't think I've had any cycling problems with which ever powder charge or bullet weight I was using. Other than that I don't see the AR reloading being any different than bolt gun reloading.

    Dillon's are nice but I wouldn't recommend it for a first press. Start with a solid single stage press.

    ARs are definitely 1K guns. They out shoot M1A, and Garand. Plus they burn almost half the powder of a 308, and less than half of the '06. Great way to get trigger time. On a budget.
     
    Last edited: Jan 9, 2011
  12. mikebob

    mikebob Well-Known Member

    Messages:
    400
    Joined:
    Jun 4, 2006
    THEY ARE NOT STEEL I DONT KNOW WHY EVERYONE IS SAYING THAT, IT IS BRASS and it burns clean too. I pulled six bullets apart 5 were the same 1 was .07 higher that's prety darn good federal gold medal match isn't that close.
     
  13. Ranger260

    Ranger260 Member

    Messages:
    20
    Joined:
    Mar 25, 2010
    mikebob,
    Are you running Wolf Gold, or standard Wolf "black box" or Military Classic? That is awesome if you are getting good results with Wolf.
     
  14. mikebob

    mikebob Well-Known Member

    Messages:
    400
    Joined:
    Jun 4, 2006
    They are just regular 55gr wolf. I thought about gold but don't need it with this ammo or rifle h & r 223 paid 200.00 dollars for.