Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
OK I need help!
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Loner" data-source="post: 561364" data-attributes="member: 24560"><p>What you are experiencing is too large of diameter not over pressure. Headspace pressure</p><p>will slam the bolt lugs back and make the bolt tight. Case diameter sticking will allow the</p><p>bolt to lift normally until the extractor tries to pull the case and then it stops like it hit a</p><p>brick wall. How do the unfired lapua cases chamber? You may have to by some undersized</p><p>dies if your dies won't bring them down. I ran into this on a barrel set back and finally had</p><p>the chamber redone. Something was wrong with the reamer in that particular case.</p></blockquote><p></p>
[QUOTE="Loner, post: 561364, member: 24560"] What you are experiencing is too large of diameter not over pressure. Headspace pressure will slam the bolt lugs back and make the bolt tight. Case diameter sticking will allow the bolt to lift normally until the extractor tries to pull the case and then it stops like it hit a brick wall. How do the unfired lapua cases chamber? You may have to by some undersized dies if your dies won't bring them down. I ran into this on a barrel set back and finally had the chamber redone. Something was wrong with the reamer in that particular case. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
OK I need help!
Top