Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Numerous misfires?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="pods8" data-source="post: 1090821" data-attributes="member: 83233"><p>Well I just broke down all those rounds and in doing so the anvils fell out of half of the unfired primers. I also deprimed some fired WLRM primers to check those out, on those the cups were under 0.120" BUT the anvil legs were solidly proud of the cup at 0.1280". I even squeezed one in pliers (spent primer) to see if the anvil would go flush with the cup rim like on the 9.5Ms, nope. Didn't budge, a bit of deformation of the legs from the pliers took the height to 0.1240" but the anvil didn't move into the cup or loosen at all.</p><p></p><p>Are all anvils supposed to be more like the WLRM ones? There is no way the RCBS primer would push those ones into the cup, but it seems quite likely with the 9.5Ms.</p><p></p><p></p><p>Yes I measure should bump. Caliber I left off as not to spark a whole "why mag primers" (which I already answered, it was a supply issue and the loads were worked up with them in mind starting low) but to answer its 7-08. This is two rifles, not just one.</p></blockquote><p></p>
[QUOTE="pods8, post: 1090821, member: 83233"] Well I just broke down all those rounds and in doing so the anvils fell out of half of the unfired primers. I also deprimed some fired WLRM primers to check those out, on those the cups were under 0.120" BUT the anvil legs were solidly proud of the cup at 0.1280". I even squeezed one in pliers (spent primer) to see if the anvil would go flush with the cup rim like on the 9.5Ms, nope. Didn't budge, a bit of deformation of the legs from the pliers took the height to 0.1240" but the anvil didn't move into the cup or loosen at all. Are all anvils supposed to be more like the WLRM ones? There is no way the RCBS primer would push those ones into the cup, but it seems quite likely with the 9.5Ms. Yes I measure should bump. Caliber I left off as not to spark a whole "why mag primers" (which I already answered, it was a supply issue and the loads were worked up with them in mind starting low) but to answer its 7-08. This is two rifles, not just one. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Numerous misfires?
Top