No load data for 6.8 SPC II

Discussion in 'Rifles, Bullets, Barrels & Ballistics' started by HiTechRob, Sep 17, 2013.

  1. HiTechRob

    HiTechRob Member

    Messages:
    19
    Joined:
    Sep 11, 2013
    Does anyone have any good reloading data for a 6.8 SPC II? The reloading manuals only cover 6.8 SPC spec, but SPC II can tolerate "hotter" loads. Unfortunately, Wilson Combat will not public their load data for the SPC II ammunition they make. I want to use Alliant Reloader 10x (which is powder they use), but I want to know what SPC II loads are built for not SPC. I am thinking and can go 1 grain above max. as listed in Nosler relaoding manual (for 11 gr. AccuBond).

    Thanks in advance for sharing!
     

  2. back40sniper

    back40sniper Member

    Messages:
    16
    Joined:
    Nov 26, 2002
    Go to a website called 68forums as there is lots of data there.
     

  3. DZelenka

    DZelenka Well-Known Member

    Messages:
    231
    Joined:
    Oct 2, 2009
    I use 10x in mine. 29.5 gr 10x under 95gr Barnes TTSX in an SSA case with a CCI 450 primer. OAL is 2.295".
     
  4. durant

    durant New Member

    Messages:
    1
    Joined:
    Aug 26, 2013
    Check out AmmoGuide Interactive. They shows 13loads for 6.8SPC II.
     
  5. HiTechRob

    HiTechRob Member

    Messages:
    19
    Joined:
    Sep 11, 2013
    Thanks for sharing this site.