NightForce ATACR Scopes...

Discussion in 'Optics For Sale' started by Bob Beck, Jan 16, 2013.

  1. Bob Beck

    Bob Beck Well-Known Member

    Messages:
    403
    Joined:
    Feb 6, 2012
    Gentlemen,

    I have the new ATACR Scopes in stock! Not only do I have them in stock, I have had some time behind the trigger on two of our EOL Rifles using this new scope.

    I can tell you the ED Glass is a very nice upgrade! The edge to edge clarity leaves no gap in between this glass and the Euro glass. They have successfully closed that gap with amazing edge to edge clarity and a crisp and clear image to target. Lets not forget the 34mm tube diameter. This allows the maximum light transmission through the 56mm ED Glass.

    One of the most prominent features that I would like to address with this scope is the 120 MOA of elevation travel. I know some of you guys will be able to utilize this extended amount of MOA, just as we do out of some of our big magnums on our LRH style rifles. It still operates with the same Highspeed Zerostop configuration as the NXS models. Absolutely Awesome, what else can I say!

    Let's not forget the fact that this all comes in under 15" and in the MOAR Reticle!

    The first 4 individuals to message me to get one of their own ATACR Scopes will get a free set of Ultralite 34mm rings in medium height, valued at $184.
     
  2. Broz

    Broz Well-Known Member

    Messages:
    8,637
    Joined:
    Feb 3, 2007
    What is the price Bob?

    Thanks for the report.

    Jeff
     

  3. Bob Beck

    Bob Beck Well-Known Member

    Messages:
    403
    Joined:
    Feb 6, 2012
    The new ATACR Scopes are $2328.
     
  4. Broz

    Broz Well-Known Member

    Messages:
    8,637
    Joined:
    Feb 3, 2007
    Thank you Bob. I was not sure of the pricing yet.

    Jeff
     
  5. vpexp

    vpexp Active Member

    Messages:
    36
    Joined:
    Dec 31, 2008
    Bob, i would like one with the Moar reticle. PM sent.
     
  6. trueblue

    trueblue Well-Known Member

    Messages:
    2,127
    Joined:
    Feb 18, 2008
    Bob,
    I run the NP - R1 and like how thin it is.
    What is the thickness of the MOAR reticle? Dont see substension listed on nightforce site.
     
  7. Bob Beck

    Bob Beck Well-Known Member

    Messages:
    403
    Joined:
    Feb 6, 2012
    A couple things to update here. A nice gentlemen was nice enough to message me and point out a topic of clarification regarding the 34mm tube diameter. The size of the tube has little to do with the light transmission. However what is able to achieve is the ability to gain up to the new 120 MOA of adjustment.

    On the reticle sub tension for the MOAR reticle compared to the NP-R1, the NP-R1 is 0.070 MOA and the MOAR is 0.140.

    Thanks again guys.
     
  8. mugadutz

    mugadutz Well-Known Member

    Messages:
    84
    Joined:
    Apr 1, 2012
    I don't about tube diameter making a difference. But the larger the tube the better, example look thru a straw then look thru a 1 inch pipe which one is easier to look thru just my 2 cents
    thanks
    Mugadutz aka Joe
     
  9. Desert Fox

    Desert Fox Well-Known Member

    Messages:
    439
    Joined:
    Jan 31, 2002
    Unless the diameter of the erector tube is larger (I doubt) in the 34MM than in 30MM or 1 inch'r for that matter, the the only advantage the 34MM have is the amount of elevation and windage travel.

    The quality of the lens has a lot to do with scope clarity, not the size of the tube.
     
  10. highplains

    highplains Well-Known Member

    Messages:
    79
    Joined:
    Apr 13, 2012
    Very interested in buying one of these for a custom build just being completed. Do you still have any in stock with the MOAR reticle?
     
  11. Bob Beck

    Bob Beck Well-Known Member

    Messages:
    403
    Joined:
    Feb 6, 2012
    Yes sir, we have the ATACR with the MOAR in stock, as well as the 34mm ring sets.

    You can either go directly to our web store @: store.extremeouterlimitstv.com to get one coming, or of course you can send in your payment as well.

    Thank you for your interest.
     
  12. Montana Billy

    Montana Billy New Member

    Messages:
    3
    Joined:
    Jan 20, 2013
    :D I've ordered one and it's on its way to pair up with my Chandler!

    Thanks, Bob!
     
  13. Westex

    Westex Well-Known Member

    Messages:
    94
    Joined:
    Dec 5, 2008
    received my ATACR today ! It is amazing , very clear optics . Bob is very good to deal with also! Thanks! Mark
     
  14. sigbrown1297

    sigbrown1297 New Member

    Messages:
    1
    Joined:
    Feb 10, 2013
    Ordered the ATACR from Bob this week. Can't wait to get it! Will post pics of the setup when i get it.