newbie, burris signature rings?

Frogman77

Well-Known Member
Joined
Feb 1, 2009
Messages
289
Does anyone know if 25 inch pounds on the ring caps is too much using these signature rings with the inserts? will the inserts prevent damage from over tightening? I only ask because when the shop installed my scope that's what they torqued the ring caps to. I've read that they should be between 15-20 inch lbs. Is another 5 inch pounds enough to damage the scope?? should I have them loosen up the rings?

thanks in advance!
 
Does anyone know if 25 inch pounds on the ring caps is too much using these signature rings with the inserts? will the inserts prevent damage from over tightening? I only ask because when the shop installed my scope that's what they torqued the ring caps to. I've read that they should be between 15-20 inch lbs. Is another 5 inch pounds enough to damage the scope?? should I have them loosen up the rings?

thanks in advance!

They will be fine.
 
Warning! This thread is more than 15 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top