New Guy, but OLD

Discussion in 'Member Introductions' started by dennyA, Dec 24, 2008.

  1. dennyA

    dennyA New Member

    Messages:
    4
    Joined:
    Dec 24, 2008
    Heys folks, I'm probably using the wrong page, but I am and avid deer hunter . I hunt in California, (blacktails), and albeit I am 65, everyday I p/u my rifle I am just as excited as I was at 12yrs. old.
    I have been fortunate and killed, (I hate the word harvested), many deer.

    Enough, I live in the Bay area of California and I am looking for a good gunsmith. Few and far between, can anyone help? I don't need anything super technical done, ie; a stock shortened and a trigger worked over.
    Thanks and go hunting.
     
  2. ss7mm

    ss7mm Writers Guild

    Messages:
    3,707
    Joined:
    Jun 11, 2005
    Welcome to Long Range Hunting.

    You might get better results if you asked your question in either the general or the gunsmithing forums. Good luck.
     

  3. dennyA

    dennyA New Member

    Messages:
    4
    Joined:
    Dec 24, 2008

    THANKS, I DID TRY, BUT BEING SOMEWHAT HANDICAPPED IN THE USE OF COMPUTERS, (i AM LEARNING AND GETTING MUCH BETTER), i COULD NOT FIND THE EXACT SITE TO LOG MY QUESTION.

    tHANKS FOR TAKING THE TIME TO WRITE BACK.
     
  4. ss7mm

    ss7mm Writers Guild

    Messages:
    3,707
    Joined:
    Jun 11, 2005
    I copied your first post above and put it in the General and Gunsmithing forums. You can track them there and see if you get some answers.

    Don't worry about the computer stuff, we're all learning all the time. Just keep experimenting and trying. There is a Test forum where you can play around, experiment and try different things like pictures etc. if you're interested. You can find it here: Link--> Test - LongRangeHunting.com