Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
New 338 lapua
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="dkhunt14" data-source="post: 998124" data-attributes="member: 14053"><p></p></blockquote><p>I use Hornady Brass with Reloader 33</p><p>Savages are known to have a tight chamber after firing if you have a problem with the bolt closing after resizing the brass just buy a Chamber polishing brush and use drill with good machine oil and polish your chamber will cure this. I had to it with my 700P.</p><p>also suggest to get a good neck sizing die </p><p></p><p>The Hornady brass is not near the brass that the Lapua Brass is. The Lapua brass will take a lot more firings. Also I would not recommend a neck die. I would full length and bump the shoulders .002. If you anneal every couple of firings the brass will last forever. If you have trouble with bolt closing after sizing you probably didn't bump the shoulder enough. Matt</p><p>[/QUOTE]</p>
[QUOTE="dkhunt14, post: 998124, member: 14053"] [/QUOTE]I use Hornady Brass with Reloader 33 Savages are known to have a tight chamber after firing if you have a problem with the bolt closing after resizing the brass just buy a Chamber polishing brush and use drill with good machine oil and polish your chamber will cure this. I had to it with my 700P. also suggest to get a good neck sizing die The Hornady brass is not near the brass that the Lapua Brass is. The Lapua brass will take a lot more firings. Also I would not recommend a neck die. I would full length and bump the shoulders .002. If you anneal every couple of firings the brass will last forever. If you have trouble with bolt closing after sizing you probably didn't bump the shoulder enough. Matt [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
New 338 lapua
Top