need help with load

Discussion in 'Rifles, Bullets, Barrels & Ballistics' started by harfman99, May 10, 2009.

  1. harfman99

    harfman99 Well-Known Member

    Messages:
    70
    Joined:
    Mar 10, 2008
    Hello

    I have just put together a 6mm 284 and need some reference data. If i could please have someone to run this through quickload that would be great.

    105 jlk
    retumbo
    fed 210
    lapua brass
    Shilen 1 in 8 twist
    finished length 29"
    I have looked all over and have not been able to find any data for this load. I would like to see 3350 with this bullet if at all possible.


    Thanks
    Chris
     
  2. AJ Peacock

    AJ Peacock Well-Known Member

    Messages:
    2,229
    Joined:
    Oct 7, 2005
    57.9gr gives you 3348fps, but is a somewhat compressed load at 107% fill ratio. the estimated pressure is 55,118psi (max is 59,465psi)

    AJ
     

  3. harfman99

    harfman99 Well-Known Member

    Messages:
    70
    Joined:
    Mar 10, 2008
    Thanks AJ that will give me a place to start from.