need help with 308

[cowboy717]

I'm needing a lil load info for a 308 rem PSS, I have lapua brass. Wondering what others have for pet loads? This is my 4th 308 and none have been as picky as this one seems. Then again I haven't used lapua brass either, should I try winchester brass?
Thank you guys!

 

[RangerEd]

Try this link:
http://www.longrangehunting.com/forums/f28/308-advice-24964/

 

[Nomad]

Loads that have worked...
Lapua 210M 168gr Nosler or SMK 44.5 Varget
Win 210M 175gr SMK 45gr Varget
Fed WLR 180gr Speer spbt 46.5 RL-17
Fed 210M 165gr Accubond 44.5 Varget
Hope that these work for you as well as they did for me......

 

[btm_54]

It depends on what your barrel twist rate is.
Here is some good reading on 308 loads.
page8
.308 Win Cartridge Guide within AccurateShooter.com

 

[mike06]

I have a Rem 700 VSSF 308 and my tack driver load is.

150 grain Sierra Match HPT
43.5 grains of Win 748
.010 off the lands
Federal Match Cases
CCI Bench Rest Primers
Chamber them one at a time

 

[OKIE2]

this is from my savage mod 12 single shot 308 26" 1 in 10 twist.
the target ia a 1 inch square

 

[oldreliable45120]

All I use is lapua brass in my 308's. I've used Rem,Win,and Fed brass, the Lapua is the best of them all. Here is a load that I've been using for a couple of years.

Lapua brass
43.5 IMR-4064
CCI BR-2 primer
168 Nosler Custom Comp bullet
2.850 OAL
I use this load in all 4 of my 308 tactical rifles, Sako TRG-22, Kimber Advanced Tactical, FN-SPR,and an older Rem 700 police. All 4 have 1/12 twist barrels and shoot 10 shot groups at 3/4" or less off a bi-pod at 100 yrds. Good luck.