Need a really good stock builder

Discussion in 'Equipment Discussions' started by Brewer, Jun 18, 2014.

  1. Brewer

    Brewer Well-Known Member

    Messages:
    304
    Joined:
    Oct 2, 2013
    Hi all, it seems that there are a billion stock makers out there. I am a few weeks from getting my Rifle back from Hart!!! (finally) and I had Richard Microfit mill me a varmint thumbhole from a laminated billet and it needs some final shaping and finishing. I was thinking about using that Fuller-Plast finish.

    I also have a billet of Cocobolo that I am planning to have made into a stock but want to make sure that I have a really good guy for this one. the wood cost me $600 so I really don't want to take chances...

    any recommendations are very helpful. Thanks
     
  2. winmagman

    winmagman Well-Known Member

    Messages:
    1,379
    Joined:
    Mar 13, 2003
    Joel Russo would be at the top of my list, and it would be a one name list.

    Chris
     

  3. J E Custom

    J E Custom Well-Known Member

    Messages:
    7,311
    Joined:
    Jul 29, 2004
    +1

    Joel has a lot of experience with exotics and If you look at his web site he has some fine examples.

    Home Page

    J E CUSTOM
     
  4. C.O. Shooter

    C.O. Shooter Well-Known Member

    Messages:
    1,800
    Joined:
    Jul 20, 2011
  5. .30US

    .30US Well-Known Member

    Messages:
    169
    Joined:
    Jul 24, 2009
    Perry Mittelstadt of Cedaredge, CO or Ryan Flynn at Aquilla Custom Gun Works.