need a little help

Discussion in 'Gunsmithing' started by golfnbass1995, Mar 2, 2009.

  1. golfnbass1995

    golfnbass1995 Active Member

    Messages:
    31
    Joined:
    Feb 21, 2009
    ok what i have is a remington 700 sps vtr with bdl type floor plate now what i want to do is put an adl stock on the gun could anyone tell me what i need thank you all so much
     
  2. cabelas90

    cabelas90 Well-Known Member

    Messages:
    247
    Joined:
    Dec 27, 2008
    If you don't mind me asking why do you want to change to an adl style stock?
     

  3. KRP

    KRP Well-Known Member

    Messages:
    591
    Joined:
    Dec 25, 2007
    Mag box, spring, and trigger guard should do it.
     
  4. golfnbass1995

    golfnbass1995 Active Member

    Messages:
    31
    Joined:
    Feb 21, 2009
    i just got an hs precision Target Silhouette stock and it is an adl style with trigger gun)
     
  5. cabelas90

    cabelas90 Well-Known Member

    Messages:
    247
    Joined:
    Dec 27, 2008
    I see.
     
  6. Dano1

    Dano1 Well-Known Member

    Messages:
    582
    Joined:
    Dec 20, 2008
    All of these parts are available on MidwayUSA. They aren't really that expensive either.

    Dan
     
  7. Coyboy

    Coyboy Well-Known Member

    Messages:
    2,132
    Joined:
    Jan 30, 2005
    Why not have the stock inletted for your bdl bottom metal?
     
  8. long range dogr

    long range dogr Well-Known Member

    Messages:
    351
    Joined:
    Feb 12, 2009
    +1 on having the stock inletted.:D
     
  9. msalm

    msalm Well-Known Member

    Messages:
    225
    Joined:
    Jul 18, 2007
    +2, just inlet the damnded thing for the BDL bottom metal. Should be easy as both of your action screw holes are there already, just stick some inletting screws in your action, drop it in the stock and lower the bottom metal to stock on the bottom side and see what needs to be removed. scribe around the exterior of the floorplate and go at it with a dremel if you're brave for the bulk of it, then chisels or backed sandpaper (milling machine being the best if you have it!:)). Don't go past the lines and start to fit it by putting inletting black (or white depending on the color of the stock inlet so it shows) and take off what shows.....
     
  10. golfnbass1995

    golfnbass1995 Active Member

    Messages:
    31
    Joined:
    Feb 21, 2009
    the stock i have has a trigger guard made into the stock
     
  11. msalm

    msalm Well-Known Member

    Messages:
    225
    Joined:
    Jul 18, 2007
    still no probem, cut it off and inlet.